TABLE C1 CONCRETE AIR CONTENT PRICE ADJUSTMENTS
Air Content Range			% Payment of Unit Price
Minimum		Maximum
1.1*	and	below	0%
0.6	to	1.0	50%
0.1	to	0.5	75%
Low air tolerance limit			100%
	Target		100%
High air tolerance limit			100%
0.1	to	0.5	98%
0.6	to	1.0	90%
1.1	to	1.5	80%
1.6	to	2.0	65%
2.1	to	3.0	50%
3.1	and	above	0%
*The Engineer may require concrete represented by air content more than 1.1% below the low air tolerance limit to be removed and replaced.
TABLE C2 WATER CEMENT RATIO PRICE ADJUSTMENTS
Water Cement Ratio Range*			% Payment of Unit Price
Minimum		Maximum
0.051	and	above	0%
0.031	to	0.050	50%
0.021	to	0.030	70%
0.011	to	0.020	80%
0.001	to	0.010	90%
-----	Limit	-----
* W/C deviation above the acceptable limits
TABLE C3 VIBRATOR FREQUENCY PRICE ADJUSTMENTS
Vibrator Frequency			% Payment of Unit Price
Minimum		Maximum
below 3500			90%
3500	to	3999*	95%
4000	to	8000	100%
8001	to	9000	90%
9001	to	10,000	75%
above 10,000			50%
* Engineer may extend the lower specification limit to include this range
Note: Price adjustment shall apply to area half the distance to the adjacent vibrator or edge of slab and the length traveled during the non-compliance
TABLE C4 CERTIFIED PLANT INSPECTION PRICE ADJUSTMENTS
Type of Work			Daily Penalty
Structural Concrete & Patching			$500
Paving			$1,000
Note: Price adjustment for failure to provide certified plant inspection. Partial days may be assessed
TABLE C5 LATE CURING APPLICATION PRICE ADJUSTMENTS
Time After Finishing (hrs)			% Payment of Unit Price
½	to	<1	95%
1	to	<1½	80%
1½	to	<2	65%
2	to	<3	50%
		More than 3	40%